Emulsion Paint – Interior
Nippon Paint Water-based Tile Paint
Nippon Paint Water-Based Tile Paint is a product designed to easily refresh and recolor old tiles and smooth surfaces. The product is not only user-friendly, but it also innovatively combines eight key features: water resistance, slip resistance, weather resistance, abrasion resistance, stain resistance, antibacterial properties, anti-fungus, and computerized colours. It offers outstanding water and weather resistance, making it suitable for kitchens, bathrooms, terraces, and other dry or wet areas on both wall and floor tiles. It has passed first-grade anti-stain standard test and withstands up to 30,000 scrubbing cycles, ensuring easier daily cleaning and maintenance. In addition, it provides multiple protections such as anti-slip, abrasion resistance, heat resistance, and moisture resistance, while being easy to apply and delivering a smooth finish that restores tiles to vibrant beauty and style. The product is eco-friendly and low-odor, certified by the U.S. Food and Drug Administration (FDA) and strictly screened under EU SVHC standards, with over 240 harmful substances “not detected,” giving you complete peace of mind.
Applicable materials: Tiles, glass, wood (except wooden flooring), marble
Application areas: Kitchen, bathroom, terrace, and other dry or wet areas on both wall and floor tiles
Internationally Certified for Safety and Reliability
Features
• Slip Resistant and Abrasion Resistant
• Water Resistant and Weather Resistant
• Anti-fungus and Anti-bacteria
• First-grade Anti-stain
• Water-based, Eco-friendly
• Computerized Colour Matching
• Suitable for Wall and Floors
• Applicable to Tiles, Glass, Wood, and Marble
Reference
Theoretical Coverage: 12-14 (m2/kg/coat) (20 microns DFT)
No of Coat Recommended: 2 coats
Diluent: Add the provided accelerator into the tile paint and stir thoroughly for at least 30 seconds until fully blended. Once the accelerator is added, the mixture must be used within 12 hours. No water dilution is required. If necessary, you may add up to 5% clean water (by volume) based on actual application feel, and stir thoroughly until well mixed.
Application: Brush, roller (4 inches sponge roller recommended)
Drying Time - Touch dry: 2-4 hours (at 25-30ºC)
Drying Time - Recoating: At least 4 hours (at 25-30ºC)
Packing: 1kg Water-based Tile Paint + 20g accelerator
Finish: Semi-gloss
Colour: Computerized Colour Matching Service Available for 931 colours which shown with “-4” at the end (e.g. RC0011-4)
Application Method:
1. Cleaning and Sanding – Clean away dust, grease, and impurities to ensure the substrate is smooth, clean, and dry. Sand the tile surface with sandpaper to improve adhesion, then wipe off any powder. (Do not sand marble or glass surfaces.)
2. Mixing – Add the provided accelerator into the tile paint and stir thoroughly for at least 30 seconds until fully blended. Once the accelerator is added, the mixture must be used within 12 hours.
3. Application – Apply evenly with a roller (sponge roller recommended) in two coats. Use a brush to touch up edges and corners. Allow 4 hours between each coat.
4. Curing – Avoid water contact (no showering) within 48 hours after application. After 7 days, the coating will reach its optimal performance and can be used normally. During the curing period, avoid collision and scratching.
*The information given applies to the product and its performance under specific test conditions. The actual data may vary slightly depending on the application conditions, methods, and surface conditions.
Leaflet
Paint Calculator
