油漆資訊
How to cope with mold and high humidity at home?
The spring season usually begins in February or March in Hong Kong but the weather may keep extremely cold and hot at the same week. With the characteristic of high density region, it may cause a serious humidity problem like forming water droplets in the celling and wall then the mold start to appear. If the mold problem is not properly handled, the situation will become more serious and dangerous, it is not only for the aesthetics problem, it may also spread to the other walls that are not affected. In addition, the long-term inhalation of the mold will have the opportunity to trigger a varying degree of sensitivity and respiratory problems, also lead to visceral and neurological damage.
Some people say it can use bleach to get rid of mold, but the use of improper and inhaling too much irritating gas may affect respiratory health, and also damage the paint or cause the wall damage such as peeling or color loss. If you want to be simple and convenient to cure for the root of the mold you can choose Nippon Paint Anti-Fungus Solution, designed for paint and also applies to indoor and outdoor walls and wood surfaces, spray on the root of the mold, can be a fast and thorough sterilization of mold. If you wipe it again, the wall will return to its original color and it can restraint the growth of mold effectively without damaging the wall.
To prevent mold and mildew stains on walls, it is important to prevent moisture and mildew beforehand. Before deciding the paint for home you should consider to choose a primer and topcoat with anti-mold and moisture-proof function, our product can release the moisture inside the wall effectively, with Nippon Paint Odour-less Wall Putty as a good base, using a brand-new clean technology, water-based environmental protection formulas, compared to the traditional mixed raw materials like vegetable glue and some powder would be more stable, high anti-algae and anti-fungus. In the above methods can eliminated the mold from the root but also reducing the growth of mold.